High Transparency, High Shielding Film
RadioClear is great for shielding radiofrequency when best transparency and shield performance are both important. Use it on windows, TV/computer screens, cellphones, digital displays, visors and more. Nearly 50 dB attenuation and highly conductive on one side (0.3 Ohm/sq). The polyester film contains a grid so fine that it is nearly impossible to see it. The grid is a diamond pattern which minimizes the Moiré effect in most applications. Amazing 77% light transmission too! Very easy to connect to ground on the conductive side. There is no adhesive on this material. 28 inch wide.
Prevents The Passage Of Electric Charge, Microwaves, And Moisture In Or Out!
EMP Faraday Bags are designed to protect against damaging EMP current, static discharge, microwave transmission, RFID snooping and moisture damage. Protect your sensitive electronics (laptops, cellphones, iPads etc), precious memories (flash drives, floppy disks, tape recordings, etc) homeopathic remedies and medications, passports, credit cards and other devices from damage and spying. Could make all the difference if there is an EMP event or solar flare. Opening can be heat sealed with a hot iron for security reasons or long term storage. Manufacturer recommends that you “nest” items inside multiple layers of protection (double bagging) for best results.
The Small 6x8" bag is perfect for your cell phones, ipods, MP3, thumbdrives, GPS and smaller cameras. Large 16x18” bag is perfect for your small laptop, gaming systems, radios and extra accessories.
Features an outstanding 38-pound puncture resistance. The multiple layer construction provides full protection against ESD, EMI/RFI and tribocharging. Because its moisture barrier performance exceeds foil laminates for low Moisture Vapor Transmission Rate (MVTR), particularly after flexing, whatever you place in the bag and seal properly is going to stay dry also! Does not provide magnetic shielding.
Meets the military specification MIL-B-81705-Rev-C*
"High Performance RF Shielding For Windows, with Adhesive"
Most RF entering or leaving a room will go through the windows. Shielding the windows is the logical first step to reduce your exposure. Don't want to replace the whole window to get good shielding? Cut ScotchTint to size, peel the backing, wet, and apply to your clean windows, doors, or other glass surfaces to block wide range of radiofrequency radiation. Provides certified 22+ dB reduction at cell phone frequencies and tested from at least 30 MHz to 4.5 GHz.
The benefits of window shielding include controlling heat gain or loss, and improved safety, security, energy efficiency, and appearance of your building. Window tint transmits approximately 19% of visible light and rejects up to 79% of the heat that would otherwise come through the window. That can translate into a savings of about one ton of air conditioning for every 100 square feet of glass exposed to sunlight. ScotchTint™ window tint also keeps you warmer in the winter months by reflecting manmade heat back into the building. This can reduce heat loss by up to 30% to save you money and improve occupant comfort.
By blocking out 98% of UV light, it protect from the sun's harmful rays and significantly reduces fabric and furniture fade. In addition, ScotchTint™ window films reduce glare to improve your indoor visibility, especially with respect to computer monitors and televisions.
If you can wallpaper a room, you can shield your windows. Easy to trim to size with scissors or blade. Optional professional installation available in most areas at additional cost if you don’t feel like doing it yourself. Installation Instructions (pdf) Can also be used without activating the adhesive. The perfect complement to shielded walls. Full rolls are 100 ft long. Silver/blue tint. Whichever side has brighter light will have a mirror like look. Choose width.
"Superior Performance RF Shielding For Windows, with Adhesive"
This material is just like ScotchTint above but with a slight amber tint and much higher shielding performance, which explains the higher cost. Use ScotchTint Super when maximum shielding is needed. Designed for use on the inside surface of windows. This film reflects the sun’s rays while allowing plenty of optical clarity and 30% light transmission to be maintained. Additionally, the film significantly reduces the amount of UVA and UVB rays transmitted, which are the main cause of fading. Combines sun protection in summer by reducing heat gain and insulation in winter by reducing heat loss. Reduces glare and eye discomfort. Extends the life and vibrancy in furniture and carpet fabrics. Reduces the risk of injury from flying glass.
Of course, the main advantage is the higher level radiofrequency shielding.
"Economy RF Shielding"
On a tight budget or have a temporary shielding situation? This lightweight conductive plastic film is a good choice. Great for windows and walls. Easy to hang with tape or tacks, and easy to trim with scissors. Can be grounded, surface resistivity is 109 Ohm/sq. Shielding performance is adequate at ~90%. Also has anti-static properties. Very low cost per square foot. May be vacuum/heat sealed. Slightly mirrored finish provides dimming effect (some light penetration). No adhesive on this material. Made in USA. Generous 36 inch x 90 feet, 2.9 mil thick. Whole rolls only.
"High Performance and Low Cost"
This has to be the shielding bargain of the century. A light weight, highly reflective mirrorized plastic curtain which is simple to install and provides well over 20 dB (10:1) reduction in common radiofrequency and microwave radiation! Hangs easily from small diameter curtain rods and can be used to shield windows, make room partitions, doorway openings, or even as a wall hanging. Also blocks UV and sunlight, so it prevents sunlight fading of your furniture, and helps prevent heat loss. Built-in sleeve for curtain rod at the top. Both sides are conductive, make sure to use a ground cord. 30 inch wide x 63 inch long, and you can trim it easily with scissors to fit. Could also be used to make a poncho. Nearly opaque silver color.
"Go Anywhere RF Shielding"
Is this you? Your skin is burning, your heart is racing, or you are feeling irritable and spacy as pulses of microwave/RF radiation wash over you. It could be in your own apartment, on a plane or subway car, hotel or class room, workplace or movie theater. Even just walking down the street!
Whether you get caught in a surprise rain storm or irritating sea of wireless radiation, you’ll be glad you packed your shielding hooded poncho. Covers head, torso and arms with >20 dB shielding.
Generously proportioned for ease of motion, one size fits most all body types. Easy to slip on and off, and extremely light weight. Keeps you warm, shaded from the sun, and dry too. Windproof.
We call it disposable, but you can certainly re-use it. Weighs only 3 ounces, and 4x5 inches and when folded. Stores safely for years, ready when you need it. Perfect for purse, car, suitcase, camping or home use. One side is conductive (the less slippery side) so it can be grounded.
"Portable RF Haven"
What do you do when you find yourself in a hotel room, at a friend’s house, or any place where you don’t control the environment and you just need relief from wifi, smart meters, cellphones, and other wireless signals?
This tent, made from aluminized Mylar (well known for its good RF shielding ability, toughness, and light weight) is so handy, versatile, and effective you won’t want to travel without one. It is basically a tube, 8 feet long, with a perimeter of 10 feet, and open at both ends. Use it the way it comes as a Faraday sleeping bag or tent (tent will need some structural support which is not included, such as rope, stakes, tape, and so on). Or slit it open to a giant 8x10 foot sheet which is big enough for a king size bed blanket, ground cover, personal wrap, or window curtain. Trim it with scissors to make a poncho, skirt, or smaller enclosures for wifi modems, etc.
Will shield you from the hot rays of the sun, keep you warm when temperatures drop, reflects light and heat, and best of all offers >20 dB microwave shielding. Completely waterproof and windproof too.
We call it disposable, but you can certainly re-use it. Weighs only 7 ounces, and 6x8 inches and when folded. Stores safely for years, ready when you need it. Perfect for car, suitcase, camping or home use. One side is conductive (the less slippery side) so it can be grounded.
Get one Tent and one Poncho for only $15.90 You save $2.00!
"Heavy Weight and Moisture Resistant Shielding Plastic"
It's plain black, shiny and big! Velostat is a very low cost, extra-wide conductive sheet for electric field shielding. Carbon impregnated black polyethylene film. 4 mil thick so it's really tough and 36 inch wide to cover large projects. Volume resistivity is <500 Ohms/cm which makes this an excellent conductor for a plastic. Conductivity is not affected by humidity or aging. Ground cords can be attached with a simple alligator clip. Use it to line walls, windows, or under your mattress to reduce electric field. Can be heat sealed. Great for wrapping lamp, telephone and computer cords too! 4 mil thick x 36 inch wide. Click Here for MSDS (.pdf)
Reduces Electric Fields From Live Wires To Ground Zero!
Composed of electrically conductive black polyethylene and great for shielding electrical cords. It's easy to slide any electrical cord
(even fits those giant dryer plugs!) through this 4 inch wide (when flat) sleeve without having to remove the plug from the end of the cord.
Surface resistivity <104 Ohms/square. Only 4 mil thick, it won't hold up to tearing, heat or abuse, but it's tough enough to do a great job on the lamp cord by your bed, the air conditioner cord, or even cables in your car. Use a grounding cable, and please be careful when handling electrical cords. Specify desired length.
Prefer the idea of a window shield that can be opened or closed at will? These attractive interior window shutters can be painted with Y-shield anti-radiation paint, click below for more information or to order through Amazon:
Affordable window shutters are available in many sizes. Simply paint one side with Y-shield, then paint over with any color latex paint you like. A great way to control both light and microwave radiation coming through the window.
Copyright 1996-2017, Less EMF Inc.